1. Yanhua ACDP-2 BMW Full Package with License ​
2. Includes ACDP 2 basic module + ACDP2 module 1/2/3/4/7/8/11 + Bench interface board(N20/N55/B38/B48) ​
3. Support BMW CAS1-CAS4+/FEM/BDC add keys & all key lost, module replacement, mileage reset, ISN read and write, Key refresh, FRM repair, TCM /TCU clone

Yanhua Mini ACDP 2 Programming Master with Module1/2/3/4/7/8/11 BMW Full Package Total 7 Authorizations

​ ​Buy ACDP 2 BMW Full Package Get Following Free Gifts: ​ ​Free ACDP-2 B48/B58 bench interface board(SK337-B) ​Free ACDP-2 N20/N13 Bench Interface Board(SK329-B) ​Free ACDP-2 N55 Bench Interface Board(SK336-B) ​Free ACDP-2 B38 bench interface board(SK339-B) ​ ​ACDP BMW Full Package Includes the Following Modules ​ ​ ​Package Features: ​ ​
1. ACDP-2 Basic Module with License A801 ​Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP),  ​and parts of Freescale / NEC MCU in circuit programming (ICP). This module is a necessary basic configuration for other modules. ​

​2. CAS Module (Module1) with License A500 ​Support BMW CAS1 – CAS3/CAS4+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data. ​ ​

3. FEM/BDC Module (Module2) with License A50A A50C ​Support BMW FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data. ​ ​

4. ACDP-2 ISN Module (Module3) with License A50B A50D A50E ​Read/write BMW N20/N55/N13 ISN code via OBD. ​Read/write BMW MSV80/MSD85 ISN code without opening DME shell. ​Read/write other DME ISN code by opening DME shell. ​ ​

Newly Add models(They do not come with the package by default, optional): ​BMW N13/N20/N63/S63/N55/B38 ISN read/write and ecu clone via bench mode ​BMW B48/B58 ISN Reading and Clone via Bench Mode ​BMW B37/B47/N47/N57 Diesel Engine Computer ISN Read/Write and Clone ​BMW N12/N14/N45/N46 DME ISN Read/Write and Clone ​BMW N47/N57 Diesel DME ISN Read/Write and Clone ​ ​

5. Read and write BMW M35080, 35160DO WT etc EEPROM (Module4) with License A802 ​Read and write BMW M35080, 35160DO WT etc EEPROM, erase 080DOWQ, 080DOWT, 160DOWQ, 160DOWT, M35128 models.

​ ​6. Refresh BMW Keys (Module7) with License A521 ​Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly. ​ ​

7. ACDP-2 BMW FRM Footwell Module (Module8) ​Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data. ​The advantage of BMW FRM of ACDP: Integrated data reading/writing, data conversion in one programmer; no need to write other cars'data; no need to coding. Simple and efficient.
​ ​8. Module 11  BMW gearbox EGS ISN clearance with License A51A ​BMW 6HP/8HP gearbox EGS ISN clearance ​

Support BMW E Chassis 8HP ISN Clear now, if you need, you can pay for the A51D License for BMW E Chassis 8HP ISN Clear ​Support BMW E Chassis 6HP ISN Clear now, if you need, yo can buy A50F License for BMW E Series 6HP(GS19D) Gearbox/Transmission TCM EGS ISN Refresh ​ ​Yanhua Mini ACDP BMW Menu Display: ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​Yanhua MINI ACDP BMW VS CGDI BMW VS Xhorse VVDI2 BMW: ​

​Yanhua Mini ACDP Highlights: ​
Test car NO longer needs engines ​YANHUA car keys programming NO longer need soldering iron ​Car locksmith NO longer needs soldering work. ​The first in the world ​Programming no need soldering ​

​Yanhua Mini ACDP IMMO/Mileage Programming ​
No need to remove chip ​No need soldering ​
No need to cut the line ​No need to lift the pin
​ ​Module1 BMW CAS1-CAS3+Key Programming via OBD ​Read CAS EEPROM ​Add Keys ​Reset Mileage ​Back up or recover CAS ​All keys Lost ​ ​
Module1 BMW CAS4/CAS4+ ​Read CAS4 EEPROM without soldering/welding ​Add Keys without soldering/welding ​Reset Mileage without soldering/welding ​Back up or recover CAS without soldering/welding ​All keys Lost without soldering/welding ​
​Module2 BMW FEM/BDC ​All keys lost without soldering/welding ​Add keys without soldering/welding ​Delete Keys without soldering/welding ​Enable/Disable keys without soldering/welding ​Read Key ID ​Repair/Replace FEM Module without soldering/welding ​Reset Mileage without soldering/welding ​

​ACDP-2 Module3 Read and Write ISN Code ​N20(mevd1724, mevd172P, mevd1729), N13(mevd1725, ), N55(mevd172, mevd1726, mevd172G, mevd172S, MEVD17, ), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728(s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX…. ​ ​

Module4 BMW 35080, 35160DO WT Read & Write ​Read and write BMW M35080, 35160DO WT etc EEPROM ​ ​

Module7 Refresh BMW Keys Module ​Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly. ​Please refer to our official blog: How to use Yanhua Mini ACDP refresh BMW keys ​ ​

ACDP-2 Module 8 BMW FRM FRM Footwell Module  ​Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data. ​ ​

Module 11  BMW gearbox EGS ISN clearance ​BMW 6HP/8HP gearbox EGS ISN clearance ​Package list:

​ ​Yanhua mini ACDP BMW Review: ​
​1. nice tool again. this stray with all the activations is also worth more (BMW CAS1, CAS2, CAS3, CAS3 +, CAS4, CAS4 +, FEM, BDC 8pin IC chip read and write ..)
​ ​2.currently i’m only doing bmw with cas 1-3 and ews my lonsdor can do cas 1-3 it will only add keys to 3+ and up. I just don’t like to solder so I figured this tool would simplify things a bit and make it faster ​ ​
3. I got it since a week and i am excited ​    M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and its better to desolder) ​    Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps) ​    Tried several CAS4 to read with out any problems, Mileage reset works too ​    CAS3 tested only 1 but read without problem ​    On a nother group they reported to create successfully keys on FEM/BDC and CAS4 ​ ​4. I just get it. ​    Reading eeprom cas4 and make a key for f11 so far done. ​    Cant say much more. ​    cas4 reading eprom compared with vvdi reading and its matching 100% ​ ​5. All 35080/160 are possible, like all other programmer can do also. ​    ACDP is also working with smartphone tethering so a router is not a must. ​    Didn’t test if it works offline, ​    Fem key making and mileage reset is confirmed by other users in WhatsApp group, ​    I can confirm mileage reset cas3/3+/4, key making cas3/3+, key 868mhz refresh ​    and frm programming ​    But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer ​    until you have figured out how to place probes correctly ​ ​6.  I have it and have had it for more than 3 months now. ​    It works perfect on all CAS types and for AKL but for FEM and BDC it still has a long way to go. ​    Its also compitable via bluetooth so not only wifi is needed. ​    Its a great and small tool, easy to use, compared to VVDI, R70, Upa and etc. ​ ​7.  for FEM/BDC with isn or key make, you have to use module 2. For 35160/35080 BMW dashboard mileage correction, you need to get module 4. ​ ​8. Tested the Mini ACDP here with 4 CAS3 and one CAS4+ without any problems. For the first CAS3 I needed more than 5 minutes to place the pins correctly but after some experiences I needed only 30 seconds for everything. Important is that you use the small screw tools to clean the contacts. ​ For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5. ​ ​9. something good to share: For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won’t need the electric bridges any more, and it is easy to use. ​ ​10. I got Yanhua mini. Interesting tool. I can connect to CAS real easy. Reads ok. So far ​ ​*1. Read F10 N55 ISN OBD - OK ​*2. Make key Cas 2 by dump - OK ​*3. Made key CAS3+all keys lost - Not working forst time, I am trying it again today just to be sure ​*4. Read FRM - OK ​*5. Renew random used key - Nok but resetting key I just made with the tool works 100%, interesting ​*6. Check key frequency - nok, It shows key frequency when making key but there is a fubction for checking random key frequency. Cant get that to work yet ​Not tested CAS 4 or FEM yet though I think it may be strong in that condidering it read F10 ISN via OBD ​ ​Support do respond to queries. They are handling my issues in 3 and 5 above. More testing to come. I like the fact that it receives free updates. That should mean issues will get resolved as we go along (not sure is CAS3 will be given that much attention). I love the idea of not soldering if only to save my poor vision ​ ​11.Today I received this tool and do some testing.  ​ ​reset used key 868mhz e series- successful reset ​cas4- reset milage to 0 - successful  ​cas4- read eeprom and flash BUT EVERY TIME DIFFERENT DATA(the read out file, named with date ). ​i will post readed files someone can check if is ok ​Frm3 xeq384 - can read and write d flash, and that is all. CAN NOT write eeprom  ​ ​FAQ: ​ ​Q: Will acdp bmw support 2019 all bmw function? ​A: It support f chassis, do not support G chassis(2019 BMW 5 series and 7 series is G chassis) ​ ​Q: With your ACDP, I need remove ST95256 from FEM? ​A: No need remove ST95256, no need weld with ACDP ​ ​Q: If ACDP can change VIN for BMW? ​A: Yes, it can change VIN for BMW: you need read out CAS data, then use ICP repair it, change VIN, save new data, finally reverse the CAS module ​ ​Q: Does ACDP BMW support 2015 BMW 528li cas4+ add keys via obd? ​A: No, CAS4/CAS4+ do not support obd mode ​ ​